Star Wars: The Last Jedi 3D BluRay 1080p48 x264 AAC5.1

Presented in full resolution, frame-sequential 3D at 48fps. 100% compatible with LG Passive 3DTV's and VR headsets!






Code:Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.2
Count of views : 2
MultiView_Layout : Both Eyes laced in one block (left eye first)
Format settings : CABAC / 4 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 2 h 31 min
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 47.952 (48000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Title : 3D Frame-Sequential (x264 high@L4.2 CRF 19 preset veryslow, tune film)
Writing library : x264 core 165 r3222 b35605a
Encoding settings : cabac=1 / ref=4 / deblock=1:-1:-1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=1.00:0.15 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=18 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=5 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=480 / keyint_min=47 / scenecut=40 / intra_refresh=0 / rc_lookahead=96 / rc=crf / mbtree=1 / crf=21.0 / qcomp=0.70 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / frame-packing=5 / ip_ratio=1.40 / aq=3:0.80
Default : Yes
Forced : No
Color range : Limited
Matrix coefficients : BT.709
Audio
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : A_AAC-2
Duration : 2 h 31 min
Channel(s) : 6 channels
Channel layout : C L R Ls Rs LFE
Sampling rate : 48.0 kHz
Frame rate : 46.875 FPS (1024 SPF)
Compression mode : Lossy
Delay relative to video : 9 ms
Title : English (DTS-HD-Master converted to AAC 5.1 quality 0.5)
Language : English
Default : Yes
Forced : No
Text
ID : 3
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Title : English 2D (BD SUP)
Language : English
Default : No
Forced : No
If you don't have a 4K passive 3D display and need to convert to Top/Bottom, you can do this in Potplayer. Use Avisynth like this:

If your passive 3D display is 1080p and supports 48/96Hz, use these settings:

Code:potplayer_source()
left = selecteven
right = selectodd
left1 = selecteven(separatefields(left))
left2 = selectodd(separatefields(left))
right1 = selectodd(separatefields(right))
right2 = selecteven(separatefields(right))
interleave(stackvertical(left1,right1), stackvertical(left2,right2))
assumeframebased
assumefps(48000/1001.0)
If your passive 3D display is 1080p and doesn't support 48/96Hz, use:
Code:potplayer_source()
Stackvertical(Selecteven.spline16resize(1920,540),Selectodd.spline16resize(1920,540))
assumefps(24000/1001.0)
If your display uses battery powered glasses and supports 48/96Hz, convert to Side by Side using:
Code:
left = selecteven
right = selectodd
left1 = selecteven(separatecolumns(left,2))
left2 = selectodd(SeparateColumns(left,2))
right1 = selectodd(SeparateColumns(right,2))
right2 = selecteven(separatecolumns(right,2))
interleave(StackHorizontal(left1,right1), StackHorizontal(left2,right2))
assumeframebased
assumefps(48000/1001.0)
If your display uses battery powered glasses and doesn't support 48/96Hz, convert to Side by Side using:
Code:potplayer_source()
Stackhorizontal(Selecteven.spline16resize(960,1080),Selectodd.spline16resize(960,1080))
assumefps(24000/1001.0)
To watch in 2D, use:
Code:potplayer_source()
selecteven